Productomschrijving
1. KLEM EENHEID
Box-type beugelplaat en sjabloon samengevoegde structuur.
● Gebruik van de technologisch toonaangevende vijfpunts dubbele knevel schuine klemming
● Goedkeuring van mechanisch verstelbare en beweegbare plaatsteun etc. om de klemstijfheid en hoge betrouwbaarheid te waarborgen
● Europese standaard geplateerde lay-out met zowel T-shot als kraangaten.Het is handiger voor het installeren en verwijderen van schimmels.
● Laagspanningsvormbeschermingsfunctie.
2. INJECTIE-EENHEID
Geoptimaliseerd ontwerp van precisie-plastificeerdersysteem
● Geoptimaliseerd ontwerp met schroef en cilinder van stikstofgelegeerd staal van superieure kwaliteit
● Balansinjectie-eenheid met twee cilinders en lineaire geleidingsondersteuning met dubbele geleidingskolom, krachtig gesloten basisverplaatsingsapparaat.
● Meertrapsdruk en meertraps aanpassing van de injectiesnelheid
● Automatische (handmatige) proportionele tegendrukregelaar
3. HYDRAULISCH SYSTEEM
● High-respons oliecircuitontwerp
● Het systeem maakt gebruik van regeling van de druk-stroomverhouding
● Alarmfunctie afwijking olietemperatuur
● Wereldberoemde merken oliepomp en regelkleppen, meer uitstekende prestaties van drukondersteuning.
4. BEDIENINGSEENHEID
● Uitgerust met een krachtige geïmporteerde controller, past het bedieningspaneel kleuren LCD-schermtechnologie met groot scherm toe, waarvan het productieproces wordt gedetecteerd en allerlei storingsanalyses worden weergegeven
● PID-temperatuurregeling die, in combinatie met een zeer nauwkeurige elektronische liniaal en computercontroller, bewegingen van injectie, drukbehoud, smelten en tegendruk regelt om de kwaliteit van gevormde producten en continuïteit van de productie te waarborgen.
Specificatie
INJECTIE EENHEID | LQHJ58S / LQHJ58 | LQHJ98S | LQHJ128S | ||||
Type schroef / stuk | A | B | C | A | B | C | abc |
Schroefdiameter / mm | 26 | 28 | 30 | 32 | 36 | 40 | 36 40 45 |
Schroef L/D-verhouding / L/D | 24 | 22 | 20.6 | 23 | 20.5 | 18.5 | 23.2 21 18.6 |
Theoretisch injectievolume / cm³ | 61 | 71 | 81 | 138 | 175 | 216 | 195 241 305 |
Injectiegewicht (PS) / g | 56 | 65 | 74 | 126 | 159 | 197 | 178 220 278 |
Injectiesnelheid / g/s | 42 | 48 | 56 | 67 | 85 | 105 | 93 115 145 |
Injectiedruk/Mpa | 223 | 192 | 168 | 239 | 189 | 153 | 215 174 137 |
Injectieslag / mm | 116 | 172 | 192 | ||||
Schroefsnelheid / rpm | 0-220 | 0-170 | 0-190 | ||||
Boldiameter van mondstuk / mm | SR12 | SR10 | SR10 | ||||
KLEM EENHEID | / | / | / | ||||
Klemkracht / KN | 580 | 980 | 1280 | ||||
Max.Vorm openingsslag / mm | 270 | 320 | 345 | ||||
Ruimte tussen trekstangen (BxH) / mm | 280x277 | 360x360 | 410x410 | ||||
Vormhoogte (Min. ~Max.) / mm | 120~350 | 100~350 | 150~430 | ||||
Dia.Van vorm Locatie Gat / mm | Φ100 | Φ125 | Φ125 | ||||
Uitwerperslag / mm | 55 | 100 | 100 | ||||
Uitwerpkracht / KN | 20 | 34 | 34 | ||||
Ejector Nummer / Stuk | 1 | 4+1 | 4+1 | ||||
ANDEREN | / | / | / | ||||
Servomotorvermogen (SPM) / Mpa | 16.0 | 17.5 | 17.5 | ||||
Servomotorvermogen (IPM) / KW | 8.6 | 12.0 | 14.0 | ||||
Nominale druk van oliepomp / KW | / | 8.9 | 13.2 | ||||
Motorvermogen pomp met constant debiet / KW | 5.5 | / | / | ||||
Verwarmingscapaciteit schroefcilinder / KW | 4.03 | 7.36 | 9.40 uur | ||||
Verwarming Sectie / Stuk | 4 | 4 | 4 | ||||
Olietank Cubage / L | 150 | 135 | 150 | ||||
Machineafmeting (LxBxH) / m | 3,37(3,5)×1,2×1,7 | 4,3 (4,35) × 1,12 × 1,9 | 4,35 (4,5) × 1,2 × 1,9 | ||||
Machinegewicht / t | 2 | 3 | 4 |
LQHJ138S | LQHJ168S | LQHJ208S | LQHJ278S | LQHJ328S/LQHJ328 | ||||||||||
A | B | C | A | B | C | A | B | C | A | B | C | A | B | C |
36 | 40 | 45 | 40 | 45 | 50 | 45 | 50 | 55 | 55 | 60 | 65 | 65 | 70 | 75 |
23.2 | 21 | 18.6 | 23 | 20.5 | 18.4 | 23 | 21 | 19 | 23.6 | 21 | 19.6 | 22.6 | 20.3 | 19 |
195 | 241 | 305 | 276 | 349 | 431 | 400 | 494 | 598 | 721 | 859 | 1008 | 1160 | 1346 | 1546 |
178 | 220 | 278 | 252 | 319 | 393 | 364 | 450 | 545 | 655 | 782 | 918 | 1056 | 1225 | 1406 |
93 | 115 | 145 | 107 | 135 | 167 | 145 | 179 | 217 | 207 | 247 | 289 | 247 | 287 | 329 |
215 | 174 | 137 | 234 | 185 | 150 | 217 | 176 | 145 | 192 | 161 | 137 | 192 | 166 | 144 |
192 | 220 | 252 | 304 | 350 | ||||||||||
0-190 | 0-190 | 0-160 | 0-165 | 0-140 | ||||||||||
SR10 | SR10 | SR10 | SR10 | SR10 | ||||||||||
/ | / | / | / | / | ||||||||||
1380 | 1680 | 2080 | 2780 | 3280 | ||||||||||
400 | 410 | 460 | 520 | 580 | ||||||||||
410x410 | 460x460 | 510x510 | 580x580 | 670x670 | ||||||||||
150~450 | 160~500 | 180~550 | 195~600 | 220 ~ 655 | ||||||||||
Φ125 | Φ125 | Φ160 | Φ160 | Φ160 | ||||||||||
130 | 120 | 150 | 160 | 180 | ||||||||||
34 | 41 | 49 | 77 | 77 | ||||||||||
4+1 | 4+1 | 4+1 | 8+1 | 8+1 | ||||||||||
/ | / | / | / | / | ||||||||||
17.5 | 17.5 | 17.5 | 17.5 | 17.5 | ||||||||||
14.0 | 17.6 | 28.3 | 29.0 | 31.0 | ||||||||||
13.2 | 16.4 | 20.4 | 26.7 | 30.2 | ||||||||||
/ | / | / | / | 30.0 | ||||||||||
9.40 uur | 12.40 uur | 13.01 | 17.25 uur | 26.20 | ||||||||||
4 | 5 | 5 | 5 | 5 | ||||||||||
150 | 183 | 200 | 243 | 460 | ||||||||||
4,55 (4,7) × 1,2 × 1,9 | 4,8 (5,05) × 1,26 × 1,92 | 5,41(5,52)×1,34×2,1 | 5,87 (6,24) × 1,5 × 2,3 | 6,71(6,8)×1,8×2,3 | ||||||||||
4.3 | 5 | 6 | 8.5 | 13 |
INJECTIE EENHEID | LQHJ398S/LQHJ398 | LQHJ508S/LQHJ508 | LQHJ628S/LQHJ628 | ||||||
Schroeftype | A | B | C | A | B | C | A | B | C |
Schroef diameter | 70 | 80 | 85 | 75 | 85 | 90 | 85 | 90 | 95 |
Schroef L / D-verhouding | 24 | 21 | 19.8 | 24 | 21 | 20 | 20 | 19 | 18 |
Theoretisch injectievolume | 1539 | 2010 | 2269 | 1882 | 2417 | 2710 | 2581 | 2893 | 3224 |
Injectie Gewicht (PS) | 1400 | 1829 | 2065 | 1713 | 2200 | 2466 | 2348 | 2633 | 2933 |
Injectiesnelheid | 296 | 386 | 436 | 339 | 436 | 489 | 518 | 581 | 648 |
injectie druk | 212 | 162 | 143 | 209 | 163 | 145 | 174 | 155 | 139 |
Injectie beroerte | 400 | 426 | 455 | ||||||
Schroef snelheid | 0-140 | 0-135 | 0-135 | ||||||
Boldiameter van mondstuk | SR15 | SR15 | SR15 | ||||||
KLEM EENHEID | / | / | / | ||||||
Klemkracht | 3980 | 5080 | 6280 | ||||||
Max.Schimmel openingsslag | 655 | 755 | 870 | ||||||
Ruimte tussen trekstangen (BxH) | 730x700 | 830x800 | 860x835 | ||||||
Vormhoogte (Min. ~Max.) | 245~720 | 265~800 | 350~880 | ||||||
Dia.Van het Gat van de Plaats van de Vorm | Φ160 | Φ200 | Φ200 | ||||||
Uitwerperslag | 200 | 250 | 245 | ||||||
Uitwerpkracht | 111 | 111 | 197 | ||||||
Uitwerper nummer | 12+1 | 12+1 | 16+1 | ||||||
ANDEREN | / | / | / | ||||||
Servomotorvermogen (SPM) | 17.5 | 17.5 | 17.5 | ||||||
Servomotorvermogen (IPM) | 45,0 | 29.0+29.0 | 29.0+31.0 | ||||||
Nominale druk van oliepomp | 35.4 | 20,5+26,7 | 28,3+28,3 | ||||||
Pompmotorvermogen met constant debiet | 37.0 | 45,0 | 55,0 | ||||||
Verwarmingscapaciteit van schroefcilinder | 32.50 | 40,75 | 40,75 | ||||||
Verwarming sectie | 5 | 5 | 5 | ||||||
Olietank Cubage | 635 | 910 | 960 | ||||||
Machineafmetingen (LxBxH) | 7,5(7,7)×1,9×2,4 | 8,3(8,43)×2,15×2,45 | 9,07(9,16)×2,19×2,55 | ||||||
Machine gewicht | 15.5 | 20 | 25.5 |
LQHJ658S/LQHJ658 | LQHJ680S/LQHJ680 | LQHJ850S/LQHJ850 | LQHJ1100S/LQHJ1100 | LQHJ1650S/LQHJ1650 | |||||||||||
A | B | C | A | B | C | A | B | C | A | B | C | A | B | C | D |
85 | 90 | 95 | 90 | 100 | 110 | 100 | 110 | 120 | 110 | 120 | 130 | 120 | 130 | 140 | 150 |
20 | 19 | 18 | 21.7 | 19.5 | 17.7 | 22 | 20 | 18.3 | 22 | 20 | 18.6 | 26 | 24 | 22.3 | 20.8 |
2581 | 2893 | 3224 | 2818 | 3479 | 4210 | 3856 | 4666 | 5553 | 4847 | 5768 | 6769 | 7043 | 8266 | 11006 | |
2348 | 2633 | 2933 | 2565 | 3166 | 3831 | 3509 | 4246 | 5053 | 4411 | 5249 | 6160 | 6408 | 7520 | 10015 | |
518 | 581 | 648 | 570 | 703 | 851 | 607 | 734 | 874 | 637 | 758 | 890 | 653 | 767 | 890 | 1021 |
174 | 155 | 139 | 177 | 143 | 118 | 184 | 152 | 128 | 175 | 147 | 125 | 193 | 164 | 142 | 123 |
455 | 443 | 491 | 510 | 623 | |||||||||||
0-135 | 0-135 | 0-105 | 0-110 | 0-100 | |||||||||||
SR15 | SR20 | SR20 | SR20 | SR25 | |||||||||||
/ | / | / | / | / | |||||||||||
6580 | 6800 | 8500 | 11000 | 16500 | |||||||||||
920 | 920 | 1040 | 1200 | 1520 | |||||||||||
910x910 | 910x910 | 1000x1000 | 1150x1100 | 1500x1350 | |||||||||||
400~950 | 400~950 | 400 ~ 1000 | 500~1200 | 700 ~ 1500 | |||||||||||
Φ200 | Φ200 | Φ250 | Φ250 | Φ315 | |||||||||||
260 | 260 | 295 | 350 | 350 | |||||||||||
212 | 212 | 212 | 215 | 318 | |||||||||||
16+1 | 16+1 | 20+1 | 20+1 | 29+1 | |||||||||||
/ | / | / | / | / | |||||||||||
17.5 | 16.0 | 20.0 | 16.0 | 16.0 | |||||||||||
29.0+31.0 | 31.0+45.0 | 45.0+56.0 | 56.0+56.0 | 65.0+65.0 | |||||||||||
28,3+28,3 | 32,2+32,2 | 35,4+35,4 | / | / | |||||||||||
55,0 | 30.0+30.0 | 37.0+37.0 | 45,0+45,0 | 45,0+45,0+45,0 | |||||||||||
40,75 | 46.50 | 56.40 | 68.00 | 92.00 uur | |||||||||||
5 | 6 | 6 | 7 | 7 | |||||||||||
830 | 1005 | 1450 | 1500 | 2000 | |||||||||||
9,4 (9,8) × 2,3 × 2,55 | 9,8 (10,3) × 2,3 × 2,6 | 11,05 × 2,5 × 2,6 | 12,5 × 2,8 × 4 | 15 × 3,4 × 5 | |||||||||||
30.5 | 33 | 42 | 65 | 100 |